toshiba toshiba corporation 433 photo relay TLP596G the information contained here is subject to change without notice. the information contained herein is presented only as guide for the applications of our products. no responsibility is assumed by toshiba for any infringements of patents or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of toshiba o r others. these toshiba products are intended for usage in general electronic equipments (of?e equipment, communication equipment, measuring equipment, domestic electri?ation, etc.) please make sure that you consult with us before you use these toshiba products in equip- ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human li fe (atomic energy control, spaceship, traf? signal, combustion control, all types of safety devices, etc.). toshiba cannot accept liability to any damage which may occur in case these toshiba products were used in the mentioned equipments without prior consultation with toshiba. telecommunication data acquisition measurement instrumentation the toshiba TLP596G consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-mosfet in a six lead plastic dip package. the TLP596G is a bi-directional switch which can replace mechanical relays in many applications. peak off-state voltage : 400v (min.) on-state current : 120ma (max.) (a connection) on-state resistance : 30 w (max.) (a connection) insulation thickness : 0.4mm (max.) isolation voltage : 2500vrms (min.) ul recognized : ul1577, file no. e67349 trigger led current (ta = 25 c) pin con?uration (top view) schematic unit in mm supplementary information page (s) lead form options 31-32 tape and reel 39-40
434 toshiba corporation TLP596G note 1: application type name for cer ti cation test, please use standar d pr oduct type name, i.e., TLP596G (ift2): TLP596G maxim um ratings (t a = 25 c) note 1: device consider ed a two ter minal device: pins 1, 2 and 3 shor ted together , and pins 4, 5 and 8 shor ted together . classifica tion (note 1) trigger led current (ma) marking of classifica tion @i on = 120ma min. max. (ift2) 2 t2 standard 5 t2, blank characteristic symbol ra ting unit led f orw ard current i f 50 ma f orw ard current der ating (t a 3 25 c) d i f / c -0.5 ma/ c p eak f orw ard current (100 m s pulse , 100pps) i fp 1 a re v erse v oltage v r 5 v j unction t emper ature t j 125 c detect or off-state output t er minal v oltage v off 400 v on-state rms current a connection i on 120 ma b connection 150 c connection 200 on-state current der ating (t a 3 25 c) a connection d i on / c -1.2 ma/ c b connection -1.5 c connection -2.0 j unction t emper ature t j 125 c stor age t emper ature range t stg -55~100 c oper ating t emper ature range t opr -20~85 c lead solder ing t emper ature (10s) t sol 260 c isolation v oltage (a c , 1 min., r.h. 60%) (note 1) bv s 2500 v r ms
toshiba corporation 435 TLP596G recommended operating conditions cir cuit connections individual electrical characteristics (t a = -25 c) coupled electrical characteristics (t a = 25 c) characteristic symbol min. typ . mx. unit supply v oltage v d 320 v f orw ard current i f 7.5 15 25 ma on-state current i on 120 ma oper ating t emper ature t opr -20 80 c characteristic symbol test condition min. typ .* mx. unit led f orw ard v oltage v f i f = 10ma 1.0 1.15 1.3 v re v erse current i r v r = 5v 10 m a capacitance c t v = 0, f = 1mhz 30 pf detect or off-state current i off v off = 400v 1 m a capacitance c off v = 0, f = 1mhz pf characteristic symbol test condition min. typ . mx. unit t r igger led current i ft i on = 120ma 1 5 ma on-state resistance a connection r on i on = 120ma, i f = 10ma 20 30 w b connection i on = 150ma, i f = 10ma 12 20 c connection i on = 200ma, i f = 10ma 6 10
436 toshiba corporation TLP596G isolation characteristics (t a = 25 c) switc hing characteristics (t a = 25 c) figure 1. switching time test circuit characteristic symbol test condition min. typ . mx. unit capacitance input to output c s v s = 0, f = 1mhz 0.8 pf isolation resistance r s v s = 500v , r.h. 60% 5 x 10 10 10 14 w isolation v oltage bv s a c , 1 min ute 2500 v r ms a c , 1 second in oil 5000 dc , 1 min ute in oil 5000 v dc characteristic symbol test condition min. typ . mx. unit t ur n-on time t on r l = 200 w v dd = 20ma, i f = 10ma 2 ms t ur n-off time t off 2
toshiba corporation 437 TLP596G
438 toshiba corporation TLP596G
|
